Mefuta e fapaneng ea phofo ea Redispersible Polymer

Liphofo tsa polymer tse qhalakantsoeng hape (RDPs) li tla ka mefuta e fapaneng, e 'ngoe le e 'ngoe e na le litšobotsi tse ikhethang tse etselitsoeng lits'ebetso tse itseng le litlhoko tsa ts'ebetso. Mona ke mefuta e meng e tloaelehileng ea liphofo tsa polymer tse qhalakantsoeng hape:

1. Li-Copolymer tsa Vinyl Acetate Ethylene (VAE):

• Li-copolymer tsa VAE ke mofuta oa RDP o sebelisoang haholo.
• Li fana ka ho khomarela ho hoholo, ho tenyetseha le ho hanyetsa metsi.
• Li-RDP tsa VAE li loketse mefuta e mengata ea lits'ebetso, ho kenyeletsoa likhomaretsi tsa lithaele, EIFS (Exterior Insulation and Finish Systems), metsoako e ikamahanyang le maemo, le lera le sa keneleng metsi.

2. Li-Copolymer tsa Vinyl Acetate Versatate (VAV):

• Li-copolymer tsa VAV li tšoana le li-copolymer tsa VAE empa li na le karolo e phahameng ea li-monomers tsa vinyl acetate.
• Li fana ka thepa e ntlafetseng ea ho tenyetseha le ho lelefatsa, e leng se etsang hore li lokele lits'ebetso tse hlokang ho tenyetseha ho hoholo le ho hanyetsa mapetso.

3. Phofo e qhalakantsoeng hape ea acrylic:

• Li-RDP tsa Acrylic li fana ka ho tšoarella ho hoholo, ho hanyetsa boemo ba leholimo le botsitso ba UV.
• Li sebelisoa hangata ho penteng ea kantle, lipenteng le li-sealant moo ts'ebetso ea nako e telele e leng ea bohlokoa.

4. Li-Copolymer tsa Ethylene Vinyl Chloride (EVC):

• Li-copolymer tsa EVC li kopanya thepa ea li-monomers tsa vinyl acetate le vinyl chloride.
• Li fana ka khanyetso e matla ea metsi le khanyetso ea lik'hemik'hale, e leng se etsang hore li lokele ho sebelisoa libakeng tse thata.

5. Li-Copolymer tsa Styrene Butadiene (SB):

• Li-copolymer tsa SB li fana ka matla a ho thaepa a phahameng, ho hanyetsa ho thulana, le ho hanyetsa ho khoholeha.
• Hangata li sebelisoa linthong tse etsang samente tse kang li-mortar tsa ho lokisa konkreite, li-grout le li-overlay.

6. Li-Copolymer tsa Ethylene Vinyl Acetate (EVA):

• Li-copolymer tsa EVA li fana ka tekano ea ho tenyetseha, ho khomarela le matla.
• Hangata li sebelisoa likhomaretsing tsa thaele, li-plaster le metsoako ea manonyeletso moo ho tenyetseha le matla a ho khomarela li leng bohlokoa.

7. Phofo e kopantsoeng e ka qhalwang hape:

• Li-RDP tse kopantsoeng li kopanya mefuta e 'meli kapa ho feta ea polymer ho fihlela litšobotsi tse itseng tsa ts'ebetso.
• Mohlala, RDP e kopantsoeng e ka kopanya VAE le li-polymer tsa acrylic ho ntlafatsa ho khomarela le ho hanyetsa boemo ba leholimo.

8. Phofo e Ikhethang e ka Nchafatsoang:

• Li-RDP tse khethehileng li etselitsoe lits'ebetso tse ikhethileng tse hlokang thepa e ikhethang.
• Mehlala e kenyelletsa RDPs tse nang le matla a ho thibela metsi a eketsehileng, ho hanyetsa ho hatsela le ho qhibilihisa, kapa ho qhalana hape ka potlako.

Qetello:

Phofo ea polymer e ka qhaloang hape e tla ka mefuta e mengata e fapaneng, e 'ngoe le e 'ngoe e fana ka thepa le melemo e fapaneng bakeng sa lits'ebetso tse fapaneng. Ka ho khetha mofuta o nepahetseng oa RDP ho latela litlhoko tse ikhethileng tsa projeke kapa sebopeho, bahlahisi ba ka ntlafatsa ts'ebetso, ho tšoarella le ts'ebetso ea lihlahisoa tsa bona.